Grinding/polishing head depends on the material to be processed
Main motor power: 11 kw
Rotation of main spindle: 460 rpm
Working rise and fall: 320 mm
Required air pressure rise and fall: 6 bar
Max. slab size: 3500x1800 mm
Slab thickness: 20 - 220 mm
Rail length: 3100 mm
Speed running movements: 0.4 - 8 m/min
Work Table dimensions: 3500x1800 mm
Operation Voltage: 400 V, 50 Hz + 0

Main motor power: 8/12kw ( two speed )
Grinding / polishing reach: 4.60 x 1.20 m
Length of bridge rail: 6 m
Dimensions table: 4.60 x 1.20 m
Power movement motors: 1.5 kw
Speed longitudinal motor: 0.5 - 4 m/min
Speed motor in cross direction: 0.5 - 7 m/min
Rise and fall of the bridge: 1 m
Power motor bridge: 1.5 kw
Of the spindle: 32 cm
Required air pressure spindle: 8 bar
Slab thickness: 2 - 100 cm
Min. slab size: 60 x 60 cm
Min. distance between slabs: 20 cm
Operation Voltage 400 V, 50 Hz + 0
Grinding and Polishing head depends on the material to be processed and the type of the head

Contour milling and polishing
Main motor power: 7.5 kw
Rotation speed motor: 700 - 3000 rpm
Tool diameter: 150 mm
Max. Arch height: 250 mm
Height adjustment: 225 mm
Power height adjustment motor: 0.75 kw
Transverse displacement: 350 mm
Propulsion transverse displacement Pneumatic cylinder
Grinding unit for flat sides
Main motor power: 7.5 kw
Rotation speed motor: 700 rpm
Tool diameter: 250 mm
Number of tool plateaus: 5
Height adjustment hand operated
Stone thickness: 40-150 mm
Row movement motor power: 0.75 kw
Speed row movement: 0.50 - 7.50 m/min
Rail length: 11,500 mm
Saw table dimensions: 8,000 x 1,000 mm
Number of brackets: 12

Main motor power: 18.5 kw
Milling rise and fall: 200 mm
Thickness: 50 - 200 mm
Material max. dimensions: 1000x600 mm
Diameter of milling head plate: 650 mm
Conveyor belt dimensions: 3000x600 mm
Motor power: 1.5 kw
Speed: 0.5 - 4 m/min
Operation Voltage 400 V, 50 Hz + 0

Overall dimensions: 3500 x 650 x 1700 mm
Main motor power: 5.5 kw
Water consumption: 3 m3/h
Range of vertical stroke: 0 - 800 mm
Grinding wheel diameter: 220 mm
Approximate weight: 850 kg

Overall dimensions: 6500 x 3100 x 2000mm
Main motor power: 15 kw
Water consumption: 4 m³/h
Required air source: 0.15 - 0.30 m3/min at 0.35 - 0.5 MPa
Approximate weight: 3,000 kg
Max. polishing size: 3000 x 1800 x 120 mm
Rotation polishing head: 560 rpm
Head traverse feeding speed: 0 - 5600 mm/min
Head lenghtways feeding speed: 0 - 4300 mm/min
Output: 2.5 -3.5 ㎡/h

Number of polishing heads: 16-20pieces
Main motor power: 11kw
Rotation speed: 450 rpm
Height adjustment: 20 cm
Operating thickness: 80 mm
Motion motor power: 7.5 kW (3 pcs)
Motion speed: 0.5 - 8.0 m/min
Conveyor belt main motor power: 7.5 kW
Conveyor speed: 5 - 50 cm/min
Functional width of the belt: 2.2/1.25m
Operation thickness: 80-150mm

Polishing head: 16/20 pcs
Max. Working width: 2000 mm
Max. Working thickness: 50 mm
Water consumption: 25L/Min
Total power: 197/254 kw
Speed: 0 ~2.5M/Min
Optional Heads: 32 pcs
Loading slab- turning platform: 2 sets
Roller conveyor: 1 set
Roller conveyor with blowing fan: 1 set
Film covering machine: 1 set

Polishing heads: 16/20 pieces

Max. working width: 2000 mm

Max. working thickness: 50 mm

Water consumption ( per head ): 1.5 m3/hr

Total power: 197/254 kW

Speed: 0 - 2.5 m/min

Operation Voltage according to cleint request

Positioned horizontal: 8 - 12 units

Positioned chamfer: Under 45°

Grinding and polishing thickness: 100 mm

Grinding and Polishing: 1450 rev/min, 2.2 kw (can be operated separately)

"SF"grinding adapter: 130 - 150 mm

Operation Voltage: 400 V, 50 Hz + 0

The machine is pneumatically operated; the bottom facet units are equipped with opposite pressure regulation for weight compensation. Both top & bottom facet units are equipped with adjustable depth stops. Each unit is equipped with an automatic detection for the end's abrasive.

Overall dimensions: 5650 x 2900 x 2450 mm

Table dimensions: 3650 x 1220 mm

Length material: 300 - 3650 mm

Min. width material: 200 mm

Thickness at round edge: 20-150 mm

Thickness at flat edge: 20 - 80 mm

Approximate weight: 4500 kg

Operation Voltage: 400 V, 50 Hz + 0

Main motor power: 1.5 / 1.9 kw

Main motor speed: 2pcs, 1450/2850 rpm

Grinding spindle: 50 mm

Water consumption: 2.7 m³/h

Tool diameter: 100 - 130 mm

Tool thread: 5/8 -11 NC

Turning movement: 0-180 degrees

Rise and fall: 110 mm

Contour Milling and Polishing Unit

Squirrel cage motor: 7.5 kw

Speed Range: 700-3000 R/min

Diameter: 150 mm 

Maximum: 250 mm

Transverse displacement: 350 mm

Grinding unit for flat sides

Squirrel cage motor: 7,5 kw

Speed: 700 R/min

Attach on plateaus diameter: 250 mm

Number of plateaus: 5pieces

Hand perating 

Stone thickness range: 40-150mm

DC motor Driven: 0.75kW

Speed infinitely: 0.50-7.50 m/min

Rail Length: 11.500 mm

Table Dimension: 8000 x 1000 mm

Operating voltage 400 V, 50 Hz + 0

Short circuited motor 1450r.p.m. 1.5kw

Grinding and polishing wheels diameter 130mm

Max, slab thickness: 80-100mm

Horizontally fitted 6nos

Bevelled edge at  top: 2 nos

Bevelled edge at  bottom: 1nos

Each unit provided with short circuited motor 2800r.p.m. 0.75kw

Grinding and polishing wheels diameter: 100mm

Driven by short circuited motor (speed steplessly regulable/frequency control): 1.5kw

Steel construction, suited for slab lengths up to 3.5m

Provided with: rubber table cover, pneumatically controlled clamping device(equipped with 13 clamping cylinders) for securing the stone against displacement, min. width 140mm

Required working pressure 6 bars

Pneumatic pressure adjustment allows each unit to put into or out of operation separately

Horizontally grinding/polishing heads: 5pcs

Driven by short circuited motor: 4kw

Working slab thickness: 20-200mm

45° fitted grinding/polishing heads: 4pcs (2 pcs on top and 2 pcs on the bottom for making bevelled edges)

45° short circuited motor: 2800r.p.m., 0.75kw

Grinding and polishing wheels 100mm

Table dimension: 3500x1000mm

Block size: 900x100x100mm

Frame driven by short circuited motor: 1.5kw